Monday, November 7, 2016

Notes about a Ravelry post

A friend pointed me to a question on Ravelry about identifying a pattern stitch, because one response to the question suggested that the pattern stitch was crocheted, rather than knitted.  Here is the link to the post in question, which includes a couple of responses I made.  Here are pictures of the swatch I knitted, along with a picture of the original garment in question:

The original picture, from a gardening magazine
An enlarged picture of the fabric,
with apologies for the resolution












I knitted this swatch (starting at bottom, binding off at top)
to explore what the stitch might have been.



Enlarged picture of the pattern stitch at top of swatch.












Given the difference in resolution between the two pictures of the stitches, I find it easier to see how they are related by squinting a bit.  I do believe they are basically the same stitch.


The stitch I used was a very simple type of brioche:  over an even number of stitches, (knit 1, knit 1 in the stitch below) all the way across.  This is a one-row repeat, so the same row is repeated each row;  For this striping, change yarn every 2nd row.








Monday, October 31, 2016

My imaginary TED talk


You can tell this isn't a real TED talk because there aren't any pictures or videos.  But here goes.  

Do you ever feel binaried out?  Like you spend your days following instructions – and it’s good, in a way, because the instructions work, so everything turns out okay, and you know you’re being efficient.  But you’re not quite sure what you did.  And all those instructions start to nag at you from time to time because you have a vague feeling that you don’t actually understand what you’re doing.

I crochet because I get binaried out a lot.

There is something wonderful in the process of taking readily available materials, using a fairly simple tool, knowing how to use that tool, and turning that material into a finished something that I can send out into the world to be useful, knowing that it will be useful in a quiet, sturdy, rich, individual way that is not exactly like anything else.  

I can do this because I learned crafts as a child, learned from my mother, who practiced crafts, not for fun, but for usefulness.  Starting early, enjoying the process, and keeping it as part of my life, I look at the materials (the yarn), think about needs to be met, and figure out a pleasing way that the yarn can be arranged to meet the need, even if it's only a dishcloth.  This is totally cool.

The process of stitching is rich:  When I’m stitching, I’m not eating.  I’m also generally not shooting my mouth off, being rude to people, not being destructive to myself, to my environment, or to my society. 

The process of stitching is soothing.  It is a physical contemplation.  Some say it is cheaper than therapy, although I haven’t seen scientific studies to compare the two to see how each scores on specific metrics.  And it’s legal.

The process of stitching is an exercise that connects my thinking brain with my small-motor-skills hands, with my environment of materials and needs.  Even further, it connects me with the people who use the things I make.  A world of connectivity.  Again, totally cool.

Much of this can be said for other crafts, so, why crochet?

On the one hand, consider other crafts.  Crafts that have been around for a long time, thousands of years – like weaving, knitting, woodworking, ceramics – all have some things in common.  They started out being incredibly useful for making things that made survival easier, at a reasonable cost.  Then, each became industrialized, reduced to a set of steps.  It is interesting to see how much of these crafts surround us in our everyday lives.  Each also retained a basic level of one-off production, now seen as an artistic medium.  Here is a spectrum of activity, from mass-production to individual artistic expression.  And the two ends of the spectrum feed off each other.  Mass-produced goods keep from getting too cheap because there is the balance that people can still make stuff for themselves.  At the same time, people can look at mass-produced goods and say, “I could do that myself!” and are encouraged to learn the crafts.

Take knitting, for example:  If there were a magic wand that could make disappear everything that was knitted, most of us would not have underwear.  There would be no T-shirts, very little athletic wear.  A lot the fabric in our lives would disappear.  That’s how much a part of our identity knitting is.  Yet, at the same time, knitting guilds celebrate hand-knitting, with members who knit for themselves, for family, for friends, and for charity. 

On the other hand, crochet isn’t quite like that.  Some years ago, Lis Paludan tried to research the presumed ancient roots of crochet and found that apparently crochet has been around only about 200 years, when it may have evolved out of a combination of tambour stitch, a socially acceptable embellishment technique (adding texture to fabric, using a hook), combined with a simple knit-like stitching, called shepherd’s knitting, where people who couldn’t afford knitting needles (poor people, not socially acceptable) made warm fabrics for mittens and other accessories, to keep warm.  She wrote about it in her book, Crochet History and Technique.


The potential of this process, removed from embellishing fabric, to create fabric was wildly popular in the 1800s.  There were suggestions that the servant class should not be allowed to crochet, to prevent them from having thoughts of accomplishment beyond their station.  Husbands complained that their wives were neglecting their household duties because of it.  Crochet could imitate cheaply and quickly intricate forms of lace-making that had been around for centuries, yet in a new way that let the stitcher undo mistakes and rework the fabric easily.  

As a cottage industry, there may have been few barriers to entry:  The lace crochet needle, or hook, was made by modifying a sewing needle and sticking it into a cork for a handle.  The single hook, possibly made from a worn-out sewing needle (cheap to make), took the place of all the fancy equipment of other techniques.

Yarn hooks are bigger, for stitching with yarn, and presented a technical difficulty:  Even though the hook seems simple, it probably took the Industrial Revolution to be able to manufacture them with the strength, consistent sizing, and a finish smooth enough to be useful.

Once crochet developed its own identity, people started trying to imitate weaving and knitting for all kinds of clothing and household fabrics.  Without a long history, though, crochet as a serious craft was, and is, still in its infancy.  We are still exploring what crochet is good for.  Most of the crochet we see is about the stitches – pattern stitches, stitch texture, and how the textures interact with color.  In a world where we can go out and buy anything we need, cheaply and disposably - which has been more and more true over the last 200 years – crochet has been limited to an artistic identity, to be a way to have fun, for the middle class, and also as a therapy (both physical and psychological) for mentally retarded people (that's the phrase we've used) or for soldiers suffering from shell shock, battle fatigue, or PTSD, as we call it now.  The focus has never been particularly on the usefulness of the finished product.

We’re getting close to exploring the craft for what the fabric can do.  Compared to knitting (with which crochet almost shares the most basic elements of yarnovers, pull-throughs, and inserts as the key elements), crochet makes a fabric that is textured and sturdy.  Knitting, in comparison, makes a fabric that is lightweight and elastic.  Put in a negative light, crochet makes a fabric that is thick and heavy, and knitting makes a fabric that is wimpy and thin.  Focusing on the stitches – the textures – and the few materials associated with crochet, there hasn’t been much emphasis on the properties of the fabric and the wider range of possible materials.  

The use of crochet by Margaret and Christine Wertheim in constructing artistic coral reefs is a step in a new direction.  There’s a great TED talk about that from 2009.

Now, with so much of our lives and our work being impacted by big data and the efficiency of not only industry but automation and artificial intelligence, it’s easy to get binaried out.  We have become very efficient at being efficient.  On the one hand, efficiency has been seen as an unalloyed good:  Industrial efficiency over the last hundred years has lifted the human population out of poverty, raised the global standard of living, to a degree never before seen.  On the other hand, there have been costs, both to the environment and to the quality of our lives as workers. Lots of folks are working on the environmental bit, but I want to address the meaningful work bit here. 

The nature of efficiency is to remove the human element from manufacturing or any other process.  This can leave workers in a position where their work is dehumanizing – not meaningful work – and challenges them to search to regain their sense of humanity outside of work -- if they have the time to do that.  For some workers, there is comfort in the idea that the company they work for is doing really good work – but that is the company's, not the worker’s, work.  What is strange is that while marketing sends us on a wild goose chase after happiness, the most efficient way for humans actually to realize that they are happy is by doing meaningful work:  work that resonates, is useful, that involves understanding the methodology – the opposite of following instructions - and that is supported/appreciated by the group.

In this process of becoming more efficient through scaling up everything, we have managed to go from a society that asks, “Why spend good money buying something ready-made when you can make it better so easily at home?” to “Why waste your time trying to make something when you don’t know how and you can buy it so easily at the store?”  We’ve gone from being problem-solver members of groups to being consumer individuals.  And money - a man-made construct that does not exist in nature - is essentially the only socially acceptable problem-solving methodology, in addition to being a significant indicator of social status.

Granted, anything useful you can make in crochet, you can go out and buy, ready-made, efficiently produced, most likely from someplace outside the US, for less money, most likely by some method other than crochet.  So why crochet anything useful? 

Unlike knitting, crochet is not binary – it hasn’t been industrialized.  It is complex at a basic level, with five basic stitches, compared to the one basic stitch in knitting.  There is no crochet machine.  Crochet is subversive that way. A human being crocheting is a lot like a 3-D printer making something.  But just because a 3-D printer can make useful stuff, why should I hand over to a machine the most efficient way for me to be happy?  Is the imperative for mass production worth the cost of our humanity?

Crocheting some of the stuff I use every day makes me feel good, empowered – I’m doing my little bit to reduce the impact of mass-production in my life.  And there’s no machine that can replace what I am doing. 

But there's an interesting thing beyond that:  When lots of people do things for themselves, corporations start to notice – they may focus on some our improvements for their products so they can sell more, or at least retain market-share.  When people don’t make the stuff they use, mass-producers can increase their own efficiency and reduce costs by simplifying what they make – which can make their products less useful for us.  And if we aren’t making our own stuff, we don’t notice that the stuff we buy isn’t as useful as it could be. 

Notice the effect of the slow-food movement on the food industry.  Mass producers of food figured out that we crave salt, sugar, and fat – all of which are necessary, in small amounts, for survival.  In large amounts, which is profitable for mass-production, these same ingredients are linked to obesity, cancer, and heart disease.  As people realize how easy it is to grow and cook – and to understand how to grow and cook – nutritious food, mass-producers of food are now starting to make their own products more nutritious. 

And to top all this off, when children learn problem-solving methodologies (through play, not just through following instructions) in the family (the natural basic unit of society), they take into adulthood the empowering understanding that there is probably a way to deal with other problems and needs they face in life.  They understand to look for ways, rather than simply to hire someone else to do it for them. 

Now, I can’t make all the stuff I need.  But there’s a balance between mass production and individual production.  If we all each spend some of our time making some things that are useful - even if it is something as small and simple as a dishcloth - together we keep that lively balance going to make life better for everyone, with the side effect of being happy.

Thank you.

Wednesday, October 26, 2016

Coral Reef Crochet

start of a coral
A few days ago, I went to some presentations put on by UCSC's Institute of the Arts and Sciences about the Coral Reef Crochet project.  Margaret Wertheim visited UCSC to introduce the concept.  Her talk was similar to her TED talk from 2009.  A current version of their reef is on display at the Museum of Art and Design (MAD) in New York City, and it will travel to UCSC in the spring.  The invitation went out for people to come together to make our own local reef, to go on display at about the same time.

Art students taking a class in 3-dimensional construction came to the talks -- they can get class credit for what they produce.  I worked with several small groups, getting them started with chain stitch and single crochet.

Regular crochet circles, to work on this project, will meet weekly at UCSC and monthly at the Seymour Marine Center.  I plan to attend as much as I can and make my own contributions to this bigger project.

This program was sponsored by the Institute of the Arts and Sciences, a fairly new venture at UCSC.  I met the founding director, John Weber, who also tried his hand at the craft.  Margaret Wertheim and her sister started the Institute For Figuring (IFF) in Los Angeles, where they promote the exploration of all kinds of intellectual stuff in non-traditional ways - a play tank, if you will, as opposed to the more traditional think tank.

Tuesday, August 30, 2016

Notes for basic caps to crochet, part 2

The caps are finished.  Got 3 caps, and they all fit me (medium, adult) just fine.  The yarn was 182 grams of KnitPicks Brava Sport, which comes in 100 gram balls of 273 yards each, according to the label.  I had a full ball and an almost-full ball.  I used a size G Boye hook, and the main stitch was half double crochet.

Doing the math:

1.82 x 273 yards = 496 yards for the 3 caps, or an average of 165 yards per cap.  The caps came out all about the same size.

What is interesting is that the Lion Brand chart of approximate yardage indicates that an adult cap should take 230 - 360 yards of sport/DK or worsted weight yarn to crochet an adult hat, or 225-275 yards to knit.  Way more yarn.  Hmm.

Nancy's Knit Knacks yarn yardage card suggests that a woman's knit hat would take 175 yards in sport or DK weight yarn, which is closer to what I got.

Clearly, Lion Brand wanted to err on the side of safety.

On to the next project!

Monday, August 29, 2016

Notes for basic caps to crochet

Today I’m wrapping up some caps for foster kids.  A woman visited the charity knitting group last week with a bag of yarn she was donating, along with a request for caps for foster kids in a camp where she helps out.  She was particularly interested in guy-colors for the caps, to end up with caps the kids would actually want to have and wear.  I like lighter-weight yarns, so I was happy to see the two balls of KnitPicks sport weight in a very sensible brown.  So I took those.  One was a full ball; the other, almost full.  Which got me thinking about cap patterns.

There are a lot of cap patterns out there, and many of us have our favorite go-to patterns, depending on the yarn and how much yarn there is.

When I know there is plenty of yarn for a cap, my favorite pattern is a side-to-side design:

Foundation sc about 1.5-2 inches, then foundation half double crochet (hdc) enough for a first row that measures 10 inches (for an adult size).  The pattern stitch is to stitch in rows of single crochet into the back loop only of the 1.5-2 inches of stitches on the one edge, and then hdc all the other stitches, until the piece measures 20 inches on the long edge.  The wide with the single crochets will be shorter, so it makes almost a rectangle that is 10” wide, 20” long on the long edge, and shorter on the other edge.

Make a seam joining the last row to the first row (you can see the dip of the seam on the cap on the left of the picture, where the seam is).  Thread a yarn needle with about 12” of yarn, and use it to gather the single crochet edge and fasten it snugly.  I use a double strand and run the yarn through the edge twice, knot tightly, and tuck in the loose ends.  In this photo the ends haven’t been tucked in yet, but I’ll get there.

The average adult head seems to be about 22-24 inches around.  The 20” size for this hat means there is negative ease of 10-20% – which just means that the cap has to stretch a bit to fit, which is fine and as it ought to be.

There was enough yarn left over to start a second cap, using a top-down pattern I like when I’m not sure if there’s enough yarn:

Starting and round 1:  Ch3, slip stitch to make a ring.  Hdc 7 into the ring.
Round 2:  Continuing in a coil, hdc 2 into each of the 7 stitches.

If you can see your stitches, continue in a coil, making 2 hdc into the 2nd stitch of the increase in the previous round, until the piece measures 7 inches across.

If you don’t know how to see your stitches:  Mark the last stitch of each round, if needed to keep track.
Round 3:  (hdc1, hdc2 in next st) 7 times – one time around.
Round 4:  (hdc2, hdc2 in next st) 7 times – one time around.
Round 5:  (hdc 3, hdc2 in nest st) 7 times – one time around.
Round 6:  (hdc 4, hdc2 in nest st) 7 times – one time around.
Continue in this progression until the piece measures 7 inches across.

Depending on your gauge and yarn, the piece may lie flat, or it may cup a bit – either way is fine.  If you want it to lie flat, increase 9 times per round instead of 7.  Since I don’t know if I will have enough yarn, I figure this is one place I can skimp and still have the cap fit just fine.  Since the cap is for someone who isn’t a full adult size (early teens), having it a bit on the smaller size should still work well.

Once the crown is 7 inches across, stop increasing.  Continue stitching in hdc in a coil until the cap measures at least 8 inches from the center.  If I have more yarn, I will make it longer so it can fold up.

Top down cap, with ears and flaps added
I didn’t specify yarn or hook or gauge for any of this because these are basic concepts that work with just about any yarn.  The kitten hat in this picture is the top-down pattern done with a super bulky yarn and a size N or so hook.  The thicker the yarn, the thicker the fabric.

About sizes:  for the adult size given here, 7” across for the crown should be good.  For a child size, 6” works.  For a baby, 5”.  Anything bigger can work for a tea cozy.

Half double crochet is great for caps:  It makes a thicker, cushier fabric than single crochet, and it doesn’t have the bigger gaps between stitches of double crochet.  It also works well with textured yarns, where you can’t always see your stitches, but my fingers can feel where the hook goes more easily than with single crochet.  It’s a handy stitch that way.

A third cap I like is the tam-style:  Make a flat round that measures 12 inches across.  Then decrease as needed for a band to fit around the head.  It occurred to me recently that if the decreases are space evenly around, you end up with a tam or beret, depending on the country of choice and how wide you make the band.  However, if the decreases are all on one half of the circle, with the other half stitched even (without decreases), the shape is the golf cap.

Saturday, August 13, 2016

Afghan Edging

I've made a twin size granny square blanket for each of my kids, and I'm currently finishing the blanket for my third son. This time, I did the border a little differently than I have in the past.

Practical Crocheter once wrote a post about granny squares.  As motifs,  these squares are interesting because they have too many increases per round to lie flat as squares.  That means that, beyond a certain number of rounds, granny squares torque and then ruffle. The ruffling effect is mitigated when we make lots of squares and join them together, but it is not entirely negated.  And that is why granny square blankets often do not lie flat and don't fold neatly.

The seams that join granny squares also create stress points in the fabric.  The chain-3 loops at the corners are fairly weak, relative to the rest of the fabric, and these corners are where seams are most likely to come undone, in part because those loops move around and pull on the joins more than other places do.  Around the perimeter of the blanket, the pulling of these chain-3 loops also pulls on the stitches in the border, since the border stitches straddle the seam.

Since I am finishing a granny square afghan now, I decided to experiment and see if I could do something about both issues.  Normally, when working my way around an afghan, I would handle two joined chain-3 loops by putting two stitches in each chain-3 loop, but none in the seam itself.  This time, I put one stitch in each loop and a decrease (in this case a dc2tog decrease) over the seam, with one half of the decrease on one side of it and the other half in the other side.



Since this blanket hasn't been used yet, I don't have any evidence that my experiment will reinforce the stress points around the perimeter. I suspect it will, since there is now a stitch directly over each join, and that stitch is more substantial than a normal double crochet.

As for the other issue, this afghan lies flat.  It is not perfectly rectangular, but it does not ruffle at all when I spread it out on the floor.

Sunday, July 3, 2016

Contemporary Fiber Art Exhibit



On a whim, I entered a piece in the upcoming exhibit at the Santa Cruz Art League.  Actually, I entered three pieces, but only one was accepted, which is plenty good enough.  So now, here is the blurb for the exhibit.  Granted, it doesn't show my piece or my name, but it IS the blurb for the show.  You'll have to trust me on that.

I dropped off the random stitch crescent shawl, along with a mannequin to display it, today.  The show opens in less than a week.

Makes me seem downright official.  Fancy that.

Saturday, June 25, 2016

Cable basket

The previous owner installed an invisible fence along the road.  The cable was in line with a row of privet bushes we planted, so it made sense for the cable to come out.  It lay in a pile, so I naturally thought, "This could be a basket."

It was a nice blue.

So I slip stitched it by hand - no hook - until there wasn't much cable left.  That became the handle.  It looked like it wanted to be a basket hanging on the inside door handle, to hold small-ish things to go out to the car.

Next time, I want the base to be more solid.  This needs a small mat - the bottom of the basket is a bit too open.

But it was a good try, I think, and took only about an hour to make.

Wednesday, June 22, 2016

Fuzzy logic

This is a brain.
This is a brain on crochet.

Or it could be a dryer ball before felting.

I love massive increases!

Saturday, May 21, 2016

Drop-preventing a 2-strap bag

Have you ever grabbed a bag with two straps, thinking you had both straps – and the whole thing slipped out of your hand and dropped, because you actually had only both sides of one strap? 

Clearly, this isn’t as bad as a real problem, but it IS frustrating, because what happens is that the bag drops, and that’s what I DIDN’T want to have happen.  And I was going for two straps because I knew that if I grabbed only one strap, the bag would dump, also not desirable.

While I can’t fix this in bags other people make, I can prevent it in bags I make.

The thing to do is to cross the straps, like an X, so each strap attaches on opposite sides of the bag, like this:

That way, even if I grab only one strap, the bag won’t dump. 

Caution:  This isn’t a good solution for short straps.  Each strap needs to be long enough so it is out of the way when you’re going through your bag.  Short straps would just get in the way.

Companies that make bags wouldn’t design them this way because it looks weird – but it sure is useful.  

That’s the great thing about making the stuff I use:  I can add design elements that make sense in my life.  Even if I'm following someone else's pattern, I can modify it with my own ideas.  It's all good.

Saturday, May 7, 2016

Crochet at the Santa Cruz Mini Maker Faire

At the Santa Cruz Mini Maker Faire recently, I had a booth to display my crochet and invite others to come play.  I also had a chance to see what fun stuff other makers demonstrated.

Just as at any other convention, I came away with insights.  Successful demonstrations at the Mini Maker Faire each had a succinct, targeted message, with an activity that required minimal audience engagement - something a child could grasp and do in a few minutes - to produce a tangible result or experience.

My booth and exhibit was a contrast to that model.  Crochet takes time to learn.  Most people can learn to chain stitch in a few minutes -- but their chain stitches are awkward and uneven.  Besides, there are machines to do that. You can chain stitch without a hook.  And what can you do with a chain stitch, anyway?

Crochet, like many traditional crafts, is impossible until the concept clicks in your mind and in your hands - then, it is suddenly intuitive, even easy.  You have to crochet badly before you can crochet well.  And crochet is complex at a basic level, with five basic stitches, so it hasn't been reduced to binary steps that can be mechanized.

Weaving and other crafts have come up with equipment that does most of the work, so the human engagement can be simplified and minimal.  Crochet hasn't done that.  My body is the crochet machine, using just the hook to channel my understanding through my hands to turn yarn into the fabric I want.

Lots of people attended.  Quite a few even stopped by my booth, learned to chain stitch or finger knit, or even ask questions about technique samples on display.  I, along with the other makers, planted a lot of seeds.  It was a good faire.

Saturday, April 30, 2016

Random Stitch Crescent Shawl

The pattern of the stitches looks like it might
be a pattern, but it isn't




This is still my current favorite shawl pattern.



A while back, I made a sensible shawl (to the degree that shawls are sensible), using a chain-1 net stitch.  I liked the yarn, a worsted weight organic cotton, with flecks of other colors, green and gold especially.  I used a sensible size I hook (5.5 mm or so).

First try, a sensible stitch








But the finished piece didn't seem right.  The sensible pattern did not fit with the earthiness of the yarn.  It was boring. I wanted something for my shoulders for summer, kind of casual, funner.  So I reworked it, using a size L (8mm hook) in random stitch.
About the same size, in random stitch - much livelier.






Depending on what I wear it with, it can be draped different ways.  It works well over a sleeveless dress or over a camisole and jeans.  I like this version much better.

It can be cowl-ish..  In a worsted weight cotton,
it is much thicker than it would be in a
lace-weight, of course.
It can have a shawl-pin



It covers the shoulders and is long enough in the back


Wednesday, April 20, 2016

Finishing a blanket, from the 1940's

Mostly done, with leftover yarn
 Not long ago, I was referred to a lady with an unfinished object (UFO).  What she had was a mostly-completed blanket, and leftover yarn, her mother worked on in about 1944 - seventy years ago!  This was most likely a Red Cross project, part of the war effort.  She also remembered knitting some squares as a young Girl Scout, herself, for a troup project, at the same time, but was not sure if any of her squares were part of this piece.

This was a common Girl Scout project, with each girl in a troup making a few squares, to end up with one or more blankets to donate to a local charity.  Squares from different stitchers come out different sizes, yet the elasticity of the stitch makes them all conform to each other when joined together.

The pattern goes like this:  Using sensible yarn and needles to match (say, worsted weight and 4.5mm, or sport and 3.5mm), cast on 20 stitches.  Garter stitch (knit every row) for 20 ridges (40 rows).  Bind off.  When you have a whole bunch of these squares, sew them together to make a blanket.  Embellish, if desired.  You can do this in any yarn, though worsted or sport weight are the most sensible, with the yarn most available.

Squares are done, ready to assemble and finish
The beauty of this teaching project is that it covers a range of basic skills:  casting on, the knit stitch, binding off (not too tightly), joining squares (preferably all the same direction), and, optionally, embellishment techniques like embroidery or different joining techniques.

It is also a meditation on the square gauge of garter stitch – carefully alternating the direction of the squares all worked in the same color makes a good textural design.   A well-chosen color scheme adds to the appeal of the project, or at least a main color that pulls it all together.  Otherwise, it gets pretty dull by the second square.  Once you get the hang of it, squares can be cranked out pretty quickly. The project is very portable up to the assembly stage.

This is the kind of project countless people have started and never finished.  Like many beginner projects, it is not terribly exciting unless it is planned or curated carefully.  Well educated, reasonably affluent women, however eager to do their part for the war effort, may feel that their skills and talents are under-utilized.  They may be dismayed to see that all the education and affluence in the world does not make something exciting out of something dull, in the absence of the skill that comes from practice.  And yet, using good yarn, good colors, and good skill, the result can be sublime.  Here’s how the project finished:
How it ended up

I added new, matching yarn only for the edging.

As we age and downsize to smaller living quarters, these projects surface from time to time.  It’s good to get closure.  Now this lady, in her ninth decade, has a completed reminder of a different time.

Sunday, January 31, 2016

Rustic wool Aran-style sweater, done

Cardigan/jacket front

Cardigan/jacket back
It's always good to finish projects.  As this one got bigger, it was a home project, not a purse project, which limited some of the time I could focus on it.   But I like how it turned out.  Here are the front and back, with some close-ups of the stitch patterns.


One of these days, I will write up the pattern stitches because they aren't difficult.  They are so visual that I know what to do by looking at what was in the previous row.  The main tricky thing was combining the single-crochet based sleeves and side panels with the cables on a ground of double crochet -- every row in the body involved short rows, working 2 rows of the sc to each row of dc.

Center back panel

Side of front detail

Saturday, January 2, 2016

Making progress - Aran-style again

Sweater back panel
Didn't  make cable-ish  sweaters  for 15 years, and now this is the  third  in less than a year.  Would  have  been  good  to finish  it a month  ago ,  but I  am making progress now.  Want to make  another one, more understated, next.  I like how crochet aran texture seems rich and earthy.

It's  still just the basic top-down construction  I've  used for years, with  the added doodling of the pattern stitches.  It can sound complicated, but lots of things  do when they get spelled out.

Sweater fronts
When the focus  is  on  the  measurements  and  not  on  gauge, it's  good  to know the measurement that  matter  first.  Here, that includes, pretty much  in the  order  of use:  back neck, across back at shoulders, armhole depth, chest/bust, upper arm, sleeve  from wrist to  underarm, around  wrist, length from back neck to lower edge.

Choosing the stitch, make a foundation  row, beginning and ending  with a double increase, with each increase adding  enough stitches for a 90-degree  corner.  The same number of stitches get  added consistently  for the  whole  yoke, creating visual  seamlines.

Count the number of stitches  between  the increases, for the back neck - that is how many stitches to add later for the neck front shaping.  For saddle shoulders, increase to the sleeves and  back until the two sleeve saddles are together as wide as the original back neck.  Then increase to the  fronts and  back until  the back reaches the  across-back measurement.  The fronts will have to reach that, too, which it will a few rows later.

Join for a pullover or continue with separate fronts for a  cardigan.  There's  a  lot  of  AT THE SAME TIME going on here, which I happen to like.  Every time one desired measurement target is reached, adjust the  direction  of the  increases to reach the next target measurement.  Increases continue  as set, being allocated to fronts, back, or sleeves, as appropriate, creating whatever  visual line you want.  Once the yoke is finished, there is a decent  gauge  swatch  right  there to figure out how many rows and decreases to work for the sleeves.

With sweaters for children, I often do stripes for the yoke, switch to a pattern stitch in one color for the body, and do some other variation for the sleeves.

Samples of all this are on my project  page  on ravelry.com.